Tenda Switch 16port Gigabit TEG1116P-16-150W w/4port PoE

Технички спецификации

TEG1116P-16-150W is a Tenda PoE Switch that offers 16 10/100/1000Mbps Base-TX RJ45 ports 1-16 comply with IEEE 802.3af standard (maximum

PoE power output

15.4 W) and 802.3at standard (maximum

PoE power output

30 W). The switch offers a maximum PoE power output of 135W and can supply power to and exchange data with APs, IP cameras and IP phones through CAT5 cables. It also provides simple management modes such as CCTV, VLAN and isolation to help reduce cabling costs of IP terminals like APs and IP cameras. --------------- Standard&Protocol - IEEE 802.3/IEEE 802.3u/IEEE 802.3ab/IEEE 802.3x/IEEE 802.3af/IEEE 802.3at Indicator - 16*Link/Act per device, 16*PoE per device, 1*Power per device Interface - 16 10/100/1000Base-T ports(Data/Power) Lightning Protection - 6KV Store & Forward - Yes exchange capacity - 32 Gbps Packet Forwarding Rate - 23.6Mpps RAM Data Buffer - 4Mb MAC Address Table - 4K PoE supply management - Port 1-16 support IEEE802.3at/af PoE standard PoE through pin - 1 2 4 5 + 3 6 7 8 - Input

Voltage - AC

100-240V~50/60Hz Dimension - 294*178*44mm ( W x D x H ) Power Consumption - in full conguration:<150W PoE Max Power Supply:135W Port

Features - Standard

the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other.

CCTV

the port cache is optimized and PoE ports 1-8 have higher priorities over the other ports. All the ports of the switch can communicate with each other.

VLAN

ports 1 to 14 are isolated from each other, but can communicate with ports 15 and 16 (uplink ports) respectively.

Isolation

ports 1 to 8 and Ports 9 to 16 belong to two di erent VLAN.This mode can be used to isolate supervision network and wireless network to make them not interfere with each other. Environment -

Operating Temperature

0?~40? (32?~104?)

Storage Temperature

-40?~70? (-40?~158?)

Operating Humidity

10%~90% non-condensing

Storage Humidity

5%~90% non-condensing