PSU 650W BE Quiet! System Power 11 80+ Bronze PCIe Gen 5.1, ATX 3.1

Технички спецификации

Total power

650 W The total power that is needed by the device, or the total power produced by the device. AC input voltage: 200 - 240 V The voltage of the AC electricity that is inputted into the product. AC input frequency: 50 Hz

Input current

4 A

Power factor

0.98 Number of +12V rail(s) : 1 Combined power (+3.3V) :120 W Combined power (+12V) : 650 W Combined power (+5V) : 120 W Combined power (-12V) : 3.6 W Combined power (+5Vsb): 15 W Max output current (+3.3V): 20 A Max output current (+12V1) : 54.17 A Max output current (+5V) : 20 A Max output current (-12V) : 0.3 A Max output current (+5Vsb): 3 A Hold time : 17.04 ms Efficiency : 89.7%

Power protection features

Features that protect the device against power problems e.g. overload. Over current, Over power, Over voltage, Overheating, Short circuit, Surge & inrush, Under voltage Ports & interfaces: Motherboard power connector. 20+4 pin ATX Number of SATA power connectors 5 Peripheral (Molex) power connectors (4-pin) White 4-pinned connector used to connect a peripheral to the power supply. 1 PCI Express power connectors (6+2 pin): 2 PCI Express power connectors (12-pin) : 1 CPU P4 connector (4-pin) : 1 CPU power connector (4+4 pin)

Cabling type

Non-Modular Performance 80 PLUS certification 80 PLUS Bronze Purpose What the product is used for. PC Power supply unit (PSU) form factor ATX ATX version ATX (Advanced Technology eXtended) is a motherboard form factor specification developed by Intel in 1995. The specification defines the key mechanical dimensions, mounting point, I/O panel, power and connector interfaces between a computer case, a motherboard and a power supply. There are many versions of ATX including ATX12V 1.x and ATX12V v2.3. 3.1 Performance EPS version 2.92 Noise level The amplitude level of the undesired background noise, usually measured in decibels (db). 30.9 dB Bearing technology Rifle Mean time between failures (MTBF) Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism. 100000 h Design Product colour The colour e.g. red, blue, green, black, white.

Active Fan diameter

12 cm

Number of fans

1 fan(s) Fan speed : 0 - 2100

Screws

included

Cable ties

included