DIMM 8GB DDR4 3200MHz Netac CL16 1G x 64-Bit/2R8 512M x 64Bit

Технички спецификации

NTBSD4P32SP-08 is a 1G x 64-bit (1R8) or 512M x 64-bit (2R8) SDRAM (Synchronous DRAM), memory module based on eight 1G x 8-bit or sixteen 512M x 8 FBGA components per module. The SPD is programmed to latency timing of 16-20-20 at 1.35V. support XMP, Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows: FEATURES •

Power Supply

VDD=1.35V Typical • VDDQ = 1.2V Typical • VPP - 2.5V Typical • VDDSPD=2.2V to 3.6V • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals • Low-power auto self refresh (LPASR) • Data bus inversion (DBI) for data bus • On-die VREFDQ generation and calibration • Single-rank • On-board I2 serial presence-detect (SPD) EEPROM • 16 internal banks; 4 groups of 4 banks each • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) • Selectable BC4 or BL8 on-the-fly (OTF) • Fly-by topology • Terminated control command and address bus •

PCB

Height 1.23” (31.25mm) • RoHS Compliant and

Halogen-Free Specification

CL(IDD): 16 cycles Row Cycle Time (tRCmin): 45ns(min.) Refresh to Active/Refresh Command Time (tRFCmin): 350ns(min.) Row Active Time (tRASmin): 26.25ns(min.)

Maximum Operating Power

TBD W* UL

Rating

94V-0

Operating Temperature

0?C to +70?C

Storage Temperature

-40?C to +85?C *Power will vary depending on the SDRAM used.