DIMM 32GB DDR5 6000MHz Kingston Fury Beast Kit CL30 RGB EXPO White (2x16)

Технички спецификации

Kingston FURY KF560C30BWEAK2-32 is a kit of two 2G x 64-bit (16GB) DDR5-6000 CL30 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 2G x 8-bit FBGA components per module. Each module kit supports AMD® EXPO v1.1 and Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 32GB. Each module has been tested to run at DDR5-6000 at a low latency timing of 30-36-36 at 1.4V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows: FACTORY TIMING PARAMETERS • Default (JEDEC): DDR5-4800 CL40-39-39 @1.1V • EXPO Profile #0: DDR5-6000 CL30-36-36 @1.4V • EXPO Profile #1: DDR5-5600 CL40-40-40 @1.25V • XMP Profile #1: DDR5-6000 CL30-36-36 @1.4V • XMP Profile #2: DDR5-5600 CL40-40-40 @1.25V Default features •

Power Supply

VDD = 1.1V Typical • VDDQ = 1.1V Typical • VPP = 1.8V Typical • VDDSPD = 1.8V to 2.0V • On-Die ECC • Height 1.66” (42.23mm), w/heatsink Default specification CL(IDD): 40 cycles Row Cycle Time (tRCmin): 48ns(min.) Refresh to Active/Refresh/Command Time (tRFCmin): 295ns(min.) Row Active Time (tRASmin): 32ns(min.) UL

Rating

94 V - 0

Operating Temperature

- 0°C to +85°C

Storage Temperature

- -55°C to +100°C